Sharp MX-3610N User Manual page 829

IMAGE SEND
PRINTING RECEIVED DATA AT A SPECIFIED TIME
Print received data at a specified time.
For stress-free printing, you should avoid
printing large numbers of pages at peak
times during the day, and when you do not
urgently need to print.
The printed data is
automatically deleted from
memory.
If the power is turned off at the
specified time, printing will start
at the timing when the power
is turned on.
This function can be specified
when the Received Data
Image Check Setting is
enabled.
If Hold Setting for Received Data
Print is enabled, this function
cannot be used.
To print received data at the specified time:
In "Setting mode", select [System Settings] → [Image Send Settings] →
[Operation Settings] → [Default Settings] → [Time Specified Output of Received
Data].
To disable the hold setting for received data print:
In "Setting mode", disable this function using [System Settings] → [Image Send
Settings] → [Operation Settings] → [Default Settings] → [Hold Setting for
Received Data Print].
Index Contents
MX-2610N / MX-3110N / MX-3610N