Sharp MX-3610N User Manual page 1006

SETTING MODE
DAYLIGHT SAVING TIME SETTING
This is the first and basic setting for operating the machine.
If [System Settings] in "Setting mode" → [Operation Settings] → [Disabling of Clock
Adjustment] is enabled, the date and time cannot be set.
Enable daylight saving time.
Item
Daylight Saving Time
Setting
Select Setting Type
Start Time
Completing Time
Adjustment Time
When this function is used, the time changes at the beginning and end of daylight saving time
as indicated in the table below.
Area
*
Europe
Australia, New Zealand
Other countries
* In some countries, the starting and ending times of daylight saving time may be different than
the times set in the machine.
Description
Select whether or not the Daylight Saving Time Setting is
enabled. If disabled, the following settings will not be possible.
Specify whether the starting and ending day of daylight saving
time are to be set using the day of the week or the date.
Set the starting time of daylight saving time. Set the starting
month. If you selected "Day of the Week" in "Select Setting
Type", set the starting week of daylight saving time and then the
starting day. If you selected "Date" in "Select Setting Type", set
the starting date. Set the hour and minute and the UTC
(Coordinated Universal Time) setting.
Set the ending time of daylight saving time in the same way as
you set the starting time.
Set the time to be adjusted when daylight saving time begins.
Standard time → Daylight
saving time
Last Sunday in March, 1:00 to
2:00 AM
Last Sunday in October, 2:00 to
3:00 AM
Select the [Daylight Saving Time Setting] checkbox so that a
checkmark appears. The clock setting is configured to normal
time plus one hour. When the
normal time.
MX-2610N / MX-3110N / MX-3610N
Daylight saving time →
Standard time
Last Sunday in October, 1:00 to
0:00 AM
Last Sunday in March 3:00 to
2:00 AM
is selected, clock returns to