FAX
USING THE AUTOMATIC DOCUMENT FEEDER FOR
TRANSMISSION
3
<
steps in all >
Place the original in the document feeder tray of the
automatic document feeder.
AUTOMATIC DOCUMENT FEEDER
Specify the destination fax number.
ENTERING DESTINATIONS
Tap the [Start] key to begin transmission.
When scanning is completed, the machine beeps.
Tap the [Preview] key to check the preview of an image before sending a fax.
For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
When scanning is completed, "Job stored." will be displayed together with a job
control number. This number can be used to locate the job in the Transaction
Report or in the Image Sending Activity Report.
Index
Contents
MX-2610N / MX-3110N / MX-3610N
Overview