Sharp MX-3610N User Manual page 95

CLEANING AND REPLACEMENT
REPLACEMENT OF TONER CARTRIDGE
When toner is running low, the message "Toner supply is low" appears.
In copy mode
When the message appears in the upper section of the screen, replace the toner cartridge for
the indicated colour.
If you continue to use the machine without replacing the cartridge, the following message will
appear when the toner runs out.
Colours that are running low or have run out of toner are indicated in ( ).
Y : Yellow toner, M:: Magenta toner, C: Cyan toner, and Bk : Black toner
Replace the toner cartridge with a one of the relevant colour.
Do not throw a toner cartridge into a fire. Toner may fly and
cause burns.
Store toner cartridges out of reach of small children.
If a toner cartridge is stored on end, the toner may harden and
become unusable. Always store toner cartridges on their side.
If a toner cartridge other than a SHARP-recommended toner
cartridge is used, the machine may not attain full quality and
performance and there is a risk of damage to the machine. Be
sure to use a SHARP-recommended toner cartridge.
If any one of the toner colours runs out (including black toner), colour printing will
no longer be possible.
If the Y, M, or C toners run out but a quantity of Bk toner still remains, printing is
performed in black and white.
Depending on your conditions of use, the colour may become light or the image
blurred.
Be sure to install four toner cartridges (Y/M/C/Bk).
Keep used toner cartridges in a plastic bag (do not discard them). Your service
technician will collect used toner cartridges.
To view the approximate amount of toner remaining (indicated in %), continually
touch the [Home Screen] button or double-tap it during printing or when the
machine is idle. When the percentage falls to "25-0%", obtain a new toner
cartridge and keep it ready for replacement.
MX-2610N / MX-3110N / MX-3610N