Sharp MX-3610N User Manual page 48

OPERATIONS COMMON TO ALL MODES
DOCUMENT GLASS
This section describes the steps for setting the original on the document glass.
Close the automatic document feeder slowly. Abruptly closing the
automatic document feeder may damage it.
Take care that your fingers are not pinched when closing the
automatic document feeder.
When scanning a thick book or other thick original, push up the back of the
automatic document feeder and then place the original.
When closing, open the automatic document feeder all the way and then close it.
Allowed original sizes
Maximum original size
Standard size
297 mm (longitudinal) x 420 mm (transversal) or A3
11" (longitudinal) x 17" (transversal)
Non-standard size
297 mm (longitudinal) x 432 mm (transversal)
11-5/8" (longitudinal) x 17" (transversal)
When the original is a non-standard size, see the appropriate explanation below for the mode
you are using.
- COPY "SPECIFYING THE ORIGINAL SIZE"
- FAX "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"
- IMAGE SEND "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"
Index Contents
MX-2610N / MX-3110N / MX-3610N
Operation