Sharp MX-3610N User Manual page 43

OPERATIONS COMMON TO ALL MODES
LOADING PAPER INTO THE BYPASS TRAY
3
< steps in all >
Open the bypass tray.
Do not place heavy objects on
the bypass tray or press down on
the tray.
When loading paper larger than A4R or
8-1/2" x 11"R, pull out the extension
guide.
Pull the extension guide all the way out.
Set the bypass tray guides
to the width of the paper.
Load the paper with the
print side facing down.
Insert the paper along the bypass tray
guides all the way into the bypass tray
until it stops.
For "Letter Head" and "Pre-
Printed", set the paper with the
print side up. However, when
[Disabling of Duplex] is enabled,
set the print side in the same
MX-2610N / MX-3110N / MX-3610N