Sharp MX-3610N User Manual page 349

COPYING
STAPLE SORT SETTING
Staple ON (excluding pamphlet copy)
Saddle stitch
Staple ON (excluding pamphlet copy)
< 2 steps in all >
Tap the [Staple Sort] key.
Select a staple position(s).
After the settings are completed, tap
When you set the Offset check box to
sheets while shifting them set by set. You can easily remove each set from the
output tray.
To change the output tray, tap the [Output Tray] key, and select the output
destination.
If the number of scanned originals exceeds the staple sheet limit, a message is
displayed. Tap the [Continue] or [Cancel] key.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
Saddle stitch
< 3 steps in all >
Tap the [Staple Sort] key.
Select [Pamphlet Copy].
Configure binding edge and cover settings.
MAKING COPIES IN PAMPHLET FORMAT
After the settings are completed, tap
on the staple sort screen. After you have checked it, tap
.
, you can output the sorted paper
and check that the [Pamphlet Copy] key is enabled
.
MX-2610N / MX-3110N / MX-3610N