Sharp MX-2010U Installation Manual

Sharp MX-2010U Installation Manual

Digital full color multifunctional system
Hide thumbs Also See for MX-2010U:

Advertisement

[1]
CONFIGURATION . . . . . . . . . . . . . . . . . . . . . 1-1
[2]
(MAIN UNIT) . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3]
Dehumidifying heater . . . . . . . . . . . . . . . . . . . 3-1
[4]
MX-DE12/DE13/DE14
(STAND/1x500/2x500/3x500 SHEET PAPER
DRAWER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5]
MX-KB11 (KEYBOARD) . . . . . . . . . . . . . . . . . 5-1
[6]
[7]
[8]
[9]
MX-PUX1 (XPS EXPANSION KIT) . . . . . . . . 9-1
[11] MX-PF10 (BARCODE FONT KIT) . . . . . . . . 11-1
(ENHANCED COMPRESSION KIT) . . . . . . 14-1
[15] MX-EB12 (MIRRORING KIT) . . . . . . . . . . . . 15-1
[16] MX-RP12
(REVERSING SINGLE PASS FEEDER). . . 16-1
[17] AR-SU1 (STAMP UNIT) . . . . . . . . . . . . . . . . 17-1
[18] MX-VR11 (DOCUMENT COVER) . . . . . . . . 18-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
INSTALLATION MANUAL
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MODEL
CONTENTS
[22] MX-FN17 (FINISHER). . . . . . . . . . . . . . . . . . 22-1
[26] MX-TR12 (EXIT TRAY UNIT) . . . . . . . . . . . . 26-1
[27] MX-TR13 (EXIT TRAY UNIT) . . . . . . . . . . . . 27-1
[33] Remote operation panel function Enable

SHARP CORPORATION

CODE: 00ZMX3610/I2E
MX-2010U/2310U
MX-2610N/3110N
MX-3610N
(PAPER PASS UNIT/FINISHER) . . . . . . . . . 24-1
(INTERNET FAX EXPANSION KIT). . . . . . . 28-1
(APPLICATION INTEGRATION MODULE) . . 29-1
(APPLICATION COMMUNICATION MODULE) . . 30-1
(EXTERNAL ACCOUNT MODULE) . . . . . . 31-1
(WEB BROWSING EXPANSION KIT) . . . . 32-1
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-1
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading

Summary of Contents for Sharp MX-2010U

  • Page 1: Table Of Contents

    INSTALLATION MANUAL CODE: 00ZMX3610/I2E DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MX-2010U/2310U MX-2610N/3110N MX-3610N MODEL CONTENTS Transit, Installation (using) environment, Note [19] MX-FX11 (FACSIMILE EXPANSION KIT) . . 19-1 [20] MX-LC11 (LARGE CAPACITY TRAY) ..20-1 CONFIGURATION ..... 1-1 [21] MX-TU12 (EXIT TRAY CABINET) .
  • Page 2 Installation ......17- 1 [2] MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) [18] MX-VR11 (DOCUMENT COVER) Unpacking .
  • Page 3 CONTENTS [34] Setting, Adjustments, Operation check 1. Firmware version check and version up ..34- 1 2. Function and operation check....34- 1 [35] Setup and adjustment data recording .
  • Page 4 Symbols in this manual The lists of symbols used in this manual are shown below. The meaning of each symbol described in the table must be understood for proper servicing. 1. Symbols used for notes and Symbol Meaning OK/GOOD Indicates a correct cautions procedure or result in an adjustment, etc.
  • Page 5 Symbol Meaning (Work content) Symbol Meaning (Work content) Cleaning Indicates that cleaning is Engage the pawl. (Vacuum) performed with a vacuum cleaner. Cleaning Indicates that cleaning is Screw lock Indicates that a screw is (Brush) performed with a brush. secured with adhesive. Indicates that oil is Unlock applied to lubricate.
  • Page 6: Transit, Installation (Using) Environment, Note

    Transit, Installation (using) environment, Note MX-3610N Service Manual Installing (use) conditions (3) Power frequency, waveform The frequency must be within the range of the specified frequency Before installing the machine, check that the following installing ±2%. If power waveform is deformed, a trouble may occur. (use) conditions are satisfied.
  • Page 7 F. Note for handling PWB and electronic parts Humidity RH When handling the PWB and the electronic parts, be sure to observe the following precautions in order to prevent against dam- age by static electricity. • When in transit or storing, put the parts in an anti-static bag or an anti-static case and do not touch them with bare hands.
  • Page 8: Transit And Delivery

    G. Note for proper drum, developing, fusing and transfer unit handling When handling the OPC drum, developing and transfer units, observe the following items. Drum unit • To prevent damage to the OPC drum, avoid working on the drum unit in high intensity light areas. •...
  • Page 9: Configuration

    [1] CONFIGURATION MX-3610N Service Manual System diagram A. 20cpm machine MX-RP12 MX-VR11 REVERSING SINGLE PASS DOCUMENT COVER FEEDER MX-2010U DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MX-TR12 MX-FN17 MX-PN11A/B/C/D EXIT TRAY UNIT FINISHER PUNCH MODULE MX-DE12 MX-DE13 MX-DE14 STAND/1x500 SHEET STAND/2x500 SHEET...
  • Page 10 B. 23cpm machine MX-2310U DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MX-TR12 MX-FN17 MX-PN11A/B/C/D EXIT TRAY UNIT FINISHER PUNCH MODULE MX-DE12 MX-DE13 MX-DE14 STAND/1x500 SHEET STAND/2x500 SHEET STAND/3x500 SHEET PAPER DRAWER PAPER DRAWER PAPER DRAWER MX-PB14 MX-PK11 MX-PUX1 MX-PF10 MX-FX11 AR-SU1 XPS EXPANSION KIT PRINTER EXPANSION KIT PS3 EXPANSION KIT BARCODE FONT KIT...
  • Page 11 C. 26/31/36cpm machine MX-FN17 MX-PN11A/B/C/D FINISHER PUNCH MODULE MX-TU12 MX-2610N EXIT TRAY CABINET MX-3110N MX-3610N DIGITAL FULL COLOR DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MULTIFUNCTIONAL SYSTEM MX-TR12 EXIT TRAY UNIT MX-PNX5A/B/C/D PUNCH MODULE MX-TR13 EXIT TRAY UNIT MX-RB10 PAPER PASS UNIT MX-LC11 LARGE CAPACITY TRAY MX-FN10...
  • Page 12: Option List

    Option list Model name Name MX-2010U MX-2310U MX-2610N MX-3110N MX-3610N Remarks Document feed system MX-RP12 REVERSING SINGLE PASS FEEDER MX-VR11 DOCUMENT COVER Paper feed system MX-DE12 STAND/1x500 SHEET PAPER DRAWER MX-DE13 STAND/2x500 SHEET PAPER DRAWER MX-DE14 STAND/3x500 SHEET PAPER DRAWER...
  • Page 13: Mx-2010U/2310U/2610N/3110N/3610N (Main Unit)

    [2] MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) MX-3610N Service Manual Unpacking A. Unpacking C. Packed items check B. Fixing tape and protection material removal Name Quantity Developer Operation manual MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 1...
  • Page 14 (2) Scanner (2/3 mirror unit) lock release Remove the optical unit fixing screw, and remove the note label. Turn the drum cover securing locks (2) to release, and then raise the drum positioning cover. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 2...
  • Page 15 When pouring the developer into the unit, use care to not get developer in to the drive section. • Check that there is proper amount of developer. (The stirring screw can be partly seen.) MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 3...
  • Page 16 When removing or installing the developing unit, put your hand from below the unit and slide it in parallel along the guide. At that time, be careful not to touch the roller surface. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 4...
  • Page 17 OFF/ON the power. If this precaution is ignored, an error of F2-40 - 43 or F2-64 - 67 may occur or an overtoner Shake the toner cartridge horizontally several times. may be caused. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 5...
  • Page 18 When the "Type" is other than plain paper, recycled paper, colored paper, or a user type, [Fax] and [Internet Fax] cannot be selected. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 6...
  • Page 19: Image Quality Check

    Used to set YES/NO of counting when non-print paper is passed through each counter. Used to set YES/NO of user calibration permission. Used to set the limit number of sheets for stapling. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 7...
  • Page 20 * "ALL_ROTATES" shows the number of rotations of adjust- ments for all the adjustment screws. "C, M, and Y(SKEW)" shows the number of adjustment click steps for each adjust- ment screw of C, M, and Y. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 8...
  • Page 21 In this case, check each drive section and the process section. Serviceman chart (Color patch section) The densities of patches 1 - 6 of Patch 7 is slightly each color are properly balanced. copied or not copied. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 9...
  • Page 22 Resolution Resolution Color difference in gray balance between the F and the R sides No white and black streaks Background density Resolution Registration Void Void Color text reproduction capability Resolution Resolution Void Void MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 10...
  • Page 23 The black low-density gradation is copied slightly. great. Void Void Resolution Resolution Density difference between the F and the R sides. No white and black streaks Resolution Void Void Low-density gradation Background density Resolution Resolution Void Void MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 11...
  • Page 24 Magenta, it means that the adjustment is proper. In an actual print mode, it is converted into the natural gray color balance by the color table. (When the color balance target is DEF 1.) MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 12...
  • Page 25 5 sheets of white paper on the printed color patch image (adjustment pattern). Press [EXECUTE] key. The printer color patch image (adjustment pattern) is printed out. (A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.) MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 13...
  • Page 26 SIM 67-27, if the color balance is adjusted to that color balance, select the [SERVICE] target. Wait until [EXECUTE] key is displayed. When it is displayed, press it. The half tone image correction is performed. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 14...
  • Page 27 Troubleshoot the cause, repair or perform necessary works, and repeat the adjustment from the beginning. If color balance or density is not satisfied, adjust the copy and printer color balance by SIM 46-74. MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 15...
  • Page 28: Dehumidifying Heater

    [3] Dehumidifying heater MX-3610N Service Manual Parts list Kit name Kit code Price rank Part name Part code Price rank Q'ty Heater electric DKIT-0425FCZZ Dehumidifier heater control switch QSW-C9294QCZZ component kit Dehumidifier heater control switch label TLABZ5256FCZZ Supporter LSUPP0140FCPZ WH PWB CPWBF1935FCE1 WH harness DHAI-4701FCPZ...
  • Page 29 Kit name Kit code Price rank Part name Part code Price rank Q'ty Scanner heater kit DKIT-0427FC11 Scanner heater (120V) RHETP0129FCPZ (120V series) Scanner heater (230V) RHETP0130FCPZ DKIT-0427FC12 Heater fixing plate LPLTM6923FCZZ (230V series) Banding band LBNDJ0013FCZ1 Clamp LHLDW7011XCZZ Screw (M3 x 4 Round-tipped) LX-BZ1041FCZZ Screw (M4 x 6 Bind machine screw) XBBS740P06000...
  • Page 30 Kit name Kit code Price rank Part name Part code Price rank Q'ty 2-/3-stage desk DKIT-0423FCZZ Heater harness (120V series) DHAI-4608FCZZ heater kit (120V series) Heater harness (200V series) DHAI-4758FCZZ DKIT-0423FC11 Heater harness 2 DHAI-4609FCZZ (200V series) Edge saddle LBSHZ0366FCZZ Clamp LHLDW1009ACZZ Clamp...
  • Page 31 Kit name Kit code Part name Part code Q'ty LCC heater kit DKIT-0424FCZZ Heater harness (120V series) DHAI-4742FCZZ (120V series) Heater harness (200V series) DHAI-3974FCZZ DKIT-0424FC11 Snap band LBNDJ0043FCP1 (200V series) AC cord fixer LFIX-0016FCZZ Protect sheet PFLT-0067FCP1 Connector cover A PCOVP2149FCZZ Connector cover B PCOVP2150FCZZ...
  • Page 32 Installation (2) WH PWB attachment Remove the snap band. Attach the supporter, and attach the WH PWB. Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when performing installation.
  • Page 33 B. Heater kit installation Attach the AC cord plate. (1) Heater unit assembly Attach the heater to the heater mounting plate and secure it with the screw (M3 x 6 S-tight). Attach the clamp, and fix the harness to the clamp. (4) Dehumidifier heater control switch attachment Connect the WH harness to the dehumidifier heater control switch, and attach the dehumidifier heater control switch.
  • Page 34 (2) Heater unit attachment (3) External fixture attachment Remove the tray 1. Attach the left cabinet lower. Attach the heater unit to the main unit, and secure it with the screw (M4 x 10 P-tight). Pass the harness of the heater through the hole on the main Attach the left cabinet.
  • Page 35 C. Scanner heater kit installation Remove the rear cabinet. (1) External fixture removal Remove the paper exit cover. Remove the left cabinet. (2) SCN-WH harness connection Remove the harness guide. Remove the left cabinet upper. Connect the SCN-WH harness connector to the scanner frame.
  • Page 36 Hang the SCN-WH harness to the main drive unit. Tighten the snap band and cut its tip to approx. 5 mm or less. Slide the banding band head to the square hole (Part that is enclosed by the mark). The banding band head and cut tip must not protrude behind the heater fixing plate.
  • Page 37 Remove two screws from the scanner bottom. Move the lamp unit by hand and check that it move smoothly in all movable area. Check that there is no interference of the harness of the scan- ner heater in the wire and the 2/3 mirror unit. Connect the harness of the scanner heater.
  • Page 38 (7) External fixture attachment Attach the left cabinet upper. Attach the rear cabinet. Attach the left cabinet. Attach the rear upper cabinet. Attach the paper exit cover. Check to confirm that the wire is not in contact with the har- ness fixing plate.
  • Page 39 D. Desk heater kit installation (3) Rear cabinet and right rear cabinet removal Remove the rear cabinet and the right rear cabinet. (1) Tray 2 heater unit assembly Attach the desk heater to the heater mounting plate, and fix it with a screw (M3 x 4).
  • Page 40 Remove the connector cover. Attach the clamp to the 1CS drive unit. Pass the heater harness 2 through the clamp, and attach the snap band to the 2CS drive unit. Connect the heater harness and the heater harness 2. Attach the edge saddle. Attach the heater harness 2, and pass it through the edge saddle.
  • Page 41 Attach the clamp to the frame. Connect the harness of the Attach the clamp to the frame. Connect the harness of the heater unit for the tray 2 to the heater harness, and pass it heater unit for the tray 3/4 to the frame, and pass it through the through the clamp.
  • Page 42 E. LCC heater kit installation Attach the rear cabinet cover of the machine. (1) Paper feed unit removal Pull out the paper feed tray. Open the upper cover. (10) Right rear cabinet and rear cabinet attachment Attach the right rear cabinet and the rear cabinet. Remove the upper cabinet.
  • Page 43 (2) Heater cover and cabinet removal Attach the protect sheet. Remove the heater cover. 75 5mm (4) Heater harness unit attachment Attach the snap band of the heater harness unit. While holding the harness upward, attach the AC cord fixer. Remove the cabinet.
  • Page 44 (5) Cabinet and heater cover attachment Pull the harness tightly in the arrow direction, and check to confirm that there is no disconnection of the snap band and Attach the cabinet. that the square hole in the frame is not covered with the har- ness.
  • Page 45 Attach the upper cabinet. Connect the connector, and tighten the screw. Close the upper cover. F. Operation check after installation Turn on the dehumidifier heater switch. Measure the resistance value between the earth terminal and the AC terminal (L side), and between the earth terminal and AC terminal (N side) with the circuit tester, and confirm they are not short-circuited.
  • Page 46: Drawer)

    [4] MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER MX-3610N Service Manual DRAWER) Installation Unpacking Before installation, be sure to turn both the operation and main If the connector is removed first, it may be damaged during the power switches off and disconnect the power plug from the power installation procedures.
  • Page 47 B. Main unit and desk unit connection Raise the linkage plates on the right and left sides of the front side of the desk unit, and fix them with the fixing screws Put the main unit on the desk unit. included in the package.
  • Page 48 Attach the connection cover included in the package. Connect the connector. Split the removed cover along the perforated line. C. Release the lock Pull out each tray. Turn and remove the fixing material, and remove the caution sheet. Attach the removed fixing material to the position shown in the figure for storage.
  • Page 49 F. Image off-center adjustment Press [EXECUTE] key. The patch image (adjustment pattern) is printed out. Set the adjustment pattern on the document table. The image lead edge position and the off-center adjustment value of the desk unit have been set to the average value when shipping from the factory.
  • Page 50: Mx-Kb11 (Keyboard)

    [5] MX-KB11 (KEYBOARD) MX-3610N Service Manual Unpacking Remove the operation panel upper cover. A. Check the packed items Name Quantity Keyboard unit Operation panel lower cover (For keyboard) Fixing screw (M4 x 8 S-tight) B. Operation panel removal Installation Slide the operation panel unit to the left, and put it down. Remove the operation panel cover.
  • Page 51 Turn over the operation panel unit. Connect the keyboard interface harness and attach the opera- tion section cover. Be sure to place the key interface harness between the opera- tion section cover and the FFC. (Section A) Remove the clamp. Peel off the mylar and disconnect the con- nector.
  • Page 52 Attach the operation panel lower cover (For keyboard) included in the package. Fit the flat cable edges with sections A of the Mylar, and remove slack in sections B of the flat cables. Attach the operation panel cover. When attaching the operation panel unit, insert the mylar tip into the cover of the operation section.
  • Page 53 Attach the operation panel cover. Attach the front cabinet upper. F. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch.
  • Page 54: Mx-Hd10 (Hard Disk Expansion Kit)

    [6] MX-HD10 (HARD DISK EXPANSION KIT) MX-3610N Service Manual Unpacking If there are some FAX/IFAX image data, use SIM66-62 to backup the image data into a USB memory. Then give the PDF A. Packed items check file to the user. The FAX/IFAX receive data can be transferred to a USB mem- ory, but cannot be restored.
  • Page 55 B. HDD unit attachment C. Replace the SD card Attach the HDD unit, and fix the screw included in the pack- Connect the power plug of the machine to the power outlet, age. and turn ON the main power switch and the operation panel power switch.
  • Page 56: Operation Check

    E. Shield plate and left cabinet attachment Attach the MFP control PWB unit to the main unit. Attach the shield plate. Attach the left cabinet. Turn ON the main power switch and the operation panel power switch. Check to confirm that the machine is booted normally. Check to confirm that the E7-03 error does not occur.
  • Page 57: Mx-Pb14 (Printer Expansion Kit)

    [7] MX-PB14 (PRINTER EXPANSION KIT) MX-3610N Service Manual Unpacking B. Printer control PWB attachment Connect the printer control PWB to the MFP control PWB, and A. Packed items check fit it with the screw included in the package. Name Quantity Printer control PWB Screw CD-ROM...
  • Page 58: Mx-Sm10 (Expansion Memory Board)

    [8] MX-SM10 (EXPANSION MEMORY BOARD) MX-3610N Service Manual Unpacking B. Expansion memory attachment Attach the expansion memory board to the DIMM4 slot of the A. Packed items check printer control PWB (20/23cpm machine) or MFP control PWB (26/31/36cpm machine). 20/23cpm machine Name Quantity Expansion memory board...
  • Page 59 C. Shield plate and left cabinet attachment Attach the shield plate. Avoid diagonal insertion of the expansion memory board for the slot. Attach the left cabinet. Do not push one end of the expansion memory board by one hand. D. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, Hold the both ends of the expansion memory board with both and turn ON the main power switch and the operation panel...
  • Page 60: Mx-Pux1 (Xps Expansion Kit)

    [9] MX-PUX1 (XPS EXPANSION KIT) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM Operation manual Product key sheet 2. Installation To enable XPS, an expansion memory (MX-SM10) must be installed. To install an expansion memory, refer to the descriptions on this Installation manual.
  • Page 61: Mx-Pk11 (Ps3 Expansion Kit)

    [10] MX-PK11 (PS3 EXPANSION KIT) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM (For Screen Font) Product key sheet 2. Installation To install the MX-PK11 (PS3 EXPANSION KIT), the printer expan- sion kit MX-PB14 is required. A.
  • Page 62: Mx-Pf10 (Barcode Font Kit)

    [11] MX-PF10 (BARCODE FONT KIT) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM Product key sheet 2. Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode.
  • Page 63: Mx-Fr25U (Data Security Kit)

    [12] MX-FR25U (DATA SECURITY KIT) MX-3610N Service Manual B. Program ROM attachment Unpacking Attach the program ROM to the OPT ROM slot of the MFP A. Packed items check control PWB. Name Quantity OPT ROM Program ROM Product key sheet User manual (CD-ROM) Installation Set the BOOT SW on the left upper side of the MFP control...
  • Page 64 D. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch. E. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode.
  • Page 65: Mx-Fr30U (Data Security Kit)

    [13] MX-FR30U (DATA SECURITY KIT) MX-3610N Service Manual Unpacking Remove the shield plate. A. Packed items check Name Quantity Program ROM Product key sheet User manual (CD-ROM) Firmware program (USB memory) B. Program ROM attachment Installation Attach the program ROM to the OPT ROM slot of the MFP control PWB.
  • Page 66 C. Shield plate and left cabinet attachment (2)-1. Key functions and operations in the boot mode Attach the shield plate. [UP] [BACK] [MENU] [DOWN] [OK] Key name Functions in the CN update mode [OK] key Executes the selected function or item. [MENU] key Selects a menu.
  • Page 67 Select the firmware file (SFU file) of the target. Use [UP] key and [DOWN] key to select the target file. When [OK] key is pressed with the directory name displayed, the control can enter the lower level directory. (However, one- step lower level) When [BACK] key is pressed in the lower level directory, the control can return to the upper level directory.
  • Page 68: Mx-Eb11

    [14] MX-EB11 (ENHANCED COMPRESSION KIT) MX-3610N Service Manual Unpacking B. Scanner function expansion PWB installation Connect the scanner function expansion PWB to the MFP con- A. Packed items check trol PWB, and fit it with the screw included in the package. Name Quantity Scanner function expansion PWB...
  • Page 69: Mx-Eb12 (Mirroring Kit)

    [15] MX-EB12 (MIRRORING KIT) MX-3610N Service Manual Installation Unpacking A. Packed items check Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when performing installation.
  • Page 70 C. Shield plate and left cabinet attachment Disconnect the connector of the standard HDD. Attach the mir- roring unit to the standard HDD, and connect the connector. Attach the shield plate. Fix the mirroring unit with the screw included in the package. Attach the left cabinet.
  • Page 71 [16] MX-RP12 (REVERSING SINGLE PASS FEEDER) MX-3610N Service Manual B. Rear upper cabinet removal Unpacking Remove the rear upper cabinet. A. Packed items check Remove the clamp. Name Quantity RSPF unit SPF glass unit Rear upper cabinet Screw (M3 x 6 S-tight) Installation Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power...
  • Page 72 D. Rear upper cabinet attachment Attach the harness guide, and fix the screw (M3 x 6 S-tight) included in the package. Connect the connector. Attach the rear upper cabinet included in the package. Place the harness of the scanner home position sensor at the back of the guide and the RSPF harness.
  • Page 73: Ar-Su1 (Stamp Unit)

    [17] AR-SU1 (STAMP UNIT) MX-3610N Service Manual Unpacking Disconnect the connector. Remove the harness guide. A. Packed items check When disconnecting the connector, be careful of the harness of the scanner home position sensor. Name Quantity Stamp unit Stamp cartridge replacement procedure Stamp cartridge Installing screw *1: When replacing the stamp cartridge, Refer to “Stamp cartridge...
  • Page 74 B. Stamp unit attachment Close the OC mat. Open the OC mat. C. RSPF unit attachment Remove the sensor cover. Attach the RSPF unit to the main unit. Remove the screw from the stamp unit mounting section. Use the removed screw to attach the stamp unit together with the Attach the harness guide, and connect the connector.
  • Page 75 E. Turn ON the power of the main unit Attach the rear upper cabinet. Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch. F. Installation check Use SIM22-10 to check to confirm that the finish stamp (AR- SU1) is recognized.
  • Page 76: Mx-Vr11 (Document Cover)

    [18] MX-VR11 (DOCUMENT COVER) MX-3610N Service Manual Unpacking A. Packed items check Name Quantity Document cover unit Installation Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet.
  • Page 77: Mx-Fx11 (Facsimile Expansion Kit)

    [19] MX-FX11 (FACSIMILE EXPANSION KIT) MX-3610N Service Manual Unpacking Hang the Fax unit on the step screw. Fix the Fax unit with the screws which were removed in the step 1). A. Packed items check Germany Australia France For othe destinations Name Quantity B.
  • Page 78 C. I/F cable connection 26/31cpm machine (Taiwan only) Connect the I/F cable to the MFP controller PWB, and fix the binding band (and FG line (Taiwan only)) with the M3 screw included in the package. Check to confirm that it is securely connected. 20/23cpm machine (Except Taiwan) D.
  • Page 79 G. Clear theFAX related software swithes Enter the SIM66-2 mode. Press DEST CODE button. Take a note of the corresponding destination code. Press BACK button to return to the code entry mode. Enter the destination code taken in procedure 3), and press SET button.
  • Page 80: Mx-Lc11 (Large Capacity Tray)

    [20] MX-LC11 (LARGE CAPACITY TRAY) MX-3610N Service Manual B. Main unit and large capacity tray unit Unpacking connection A. Packed items check Attach the mounting plate upper to the right side of the main unit with the fixing screw A. When attachment, put the rubber section of the mounting plate upper on the lower side.
  • Page 81 Remove the screw cap, and remove the screw. Fix the other fixing screw B, and tighten the temporarily fixed screw B securely. Remove the cover. While lifting the section marked with , insert the connection unit into the large capacity tray unit, and fix the fixing screw C at the mark A on the connection unit.
  • Page 82 Check to insure that the height adjustment check rib of the Loosen the adjustment screw on the F side. large capacity tray unit and the axis line of the mounting plate upper mounted to the main unit are in the same line. Use the adjustment screw on the front side for the adjustment.
  • Page 83 E. Paper size switch Tighten the loosened screw. Since the factory setting of the paper size is A4, if paper size switch is required, perform the following procedures. (1) Paper size switch from A4 to LT Slowly pull out the tray until it stops. D.
  • Page 84 a. Side plate size switch b. Auxiliary guide size switch Remove four fixing screws (blue screws) which are fixing the When switching the size of the side plate R, check to confirm upper and the lower sections of the side plate F and the side the mark position ( ) of the side plate R and the size guide plate R.
  • Page 85 (2) Paper size switch from A4 to B5 Slightly push the tray, restore the stopper to the original posi- tion, and fix the fixing screw. Slowly pull out the tray until it stops. Loosen the stopper fixing screw on the right lower side of the At that time, check to insure that the stopper pawl is engaged tray so that the stopper does not function.
  • Page 86 Adjust the mark position of the tray and the side plates in the Insert the removed rear edge shaft into the mounting hole in lower section of the side plates F/R according to the desired the paper feed base as shown in the figure below. Fix the size.
  • Page 87 Slowly insert the tray to the original position. Select a paper feed tray to be adjusted. F. Turn on the power of the main unit Press [EXECUTE] key. Connect the power plug of the machine to the power outlet, The adjustment pattern is printed out. and turn ON the main power switch and the operation panel Set the adjustment pattern on the document table.
  • Page 88 Loosen the stopper fixing screw on the right lower side of the Slowly insert the tray to the original position. tray so that the stopper does not function. Then make a copy to check to insure that there is no more shift.
  • Page 89: Mx-Tu12 (Exit Tray Cabinet)

    [21] MX-TU12 (EXIT TRAY CABINET) MX-3610N Service Manual 1. Unpacking Attach the front cabinet upper, and close the front cabinet. A. Packed items check Attach the paper holding arm. Name Quantity Paper exit tray Screw Paper holding arm Full detection actuator Paper exit cover 2.
  • Page 90 Attach the paper exit cover. B. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch. MX-3610N MX-TU12 (EXIT TRAY CABINET) 21 – 2...
  • Page 91: Mx-Fn17 (Finisher)

    [22] MX-FN17 (FINISHER) MX-3610N Service Manual Installation Unpacking A. Packed items check Check to confirm that the firmware version is later than below. If the version is older, upgrade the firmware. Firmware version: 01.02.03.00 Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet.
  • Page 92 B. External fixture removal Remove the left cabinet upper. Open the front cabinet, and remove the front cabinet upper. Remove the paper exit cover. C. Packed items attachment Attach the safety cover to the attachment, and fix it with the screw (M3 x 6 S tight, with flange).
  • Page 93 Hold the rib of the paper exit shifter with the fixing guide, fit it to Attach the path guide and fix it with the screw (M3 x 6 S tight, the notch in the attachment, and fix it with the screw (M4 x 10 with flange).
  • Page 94 D. External fixture attachment 10) Insert the open/close cover into the fulcrum shaft, and fix it with the clip. Remove the left cabinet upper rear from the left cabinet upper. Attach the left cabinet upper. 11) Attach the fulcrum cover and fix it with the screw (M3 x 6 S tight).
  • Page 95 E. Finisher attachment Attach the left rear cover, and fix it with the screw (M4 x 7 S tight). Remove the package supporting plate from the finisher. Check to confirm that the I/F cable is in the concave section in the left rear cover.
  • Page 96 G. Staple position label attachment Attach the staple position label (for the scanner). First label Fit with the corner R. Fit with the corner R. Label attachment reference * Corner of the upper cabinet bottom Attach the staple position label (for the RSPF). H.
  • Page 97: Mx-Pn11A/B/C/D (Punch Module)

    [23] MX-PN11A/B/C/D (PUNCH MODULE) MX-3610N Service Manual Unpacking A. Open/close cover and path guide removal Remove the fulcrum cover. A. Packed items check Remove the clip. Remove the fulcrum, and remove the open/ Name Quantity close cover. Punch unit Punch dust label Punch position label (For the scanner) Punch position label (For the RSPF) Installation...
  • Page 98 Remove the path guide. Insert the fulcrum shaft into the open/close cover, and attach the cover and fix it with the clip. B. Punch unit attachment Attach the punch unit. Attach the fulcrum cover. D. Label attachment C. Open/close cover attachment Attach the punch dust label.
  • Page 99 Attach the punch position label (for the scanner). No clearance Second label First label Fit with the corner R. Label attachment reference * Corner of the upper cabinet bottom Attach the punch position label (for the RSPF). R2.5 line of tangency Ridge line R2.5 E.
  • Page 100: Mx-Rb10/Fn10 (Paper Pass Unit/Finisher)

    [24] MX-RB10/FN10 (PAPER PASS UNIT/FINISHER) MX-3610N Service Manual Unpacking One person tilt the saddle stitch finisher, another person remove the lower tray. A. Saddle finisher removal For removal of the saddle stitch finisher, manpower of two persons or more is required. Holding the upper part of the saddle stitch finisher by two peo- ple, pull up the saddle stitch finisher, and make it stand upright.
  • Page 101 Installation B. Packed items check (1) Paper pass unit Check to confirm that the firmware version is later than below. If the version is older, upgrade the firmware. Firmware version: 01.07.02.00 Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet.
  • Page 102 Remove the paper exit tray cover. Attach the right cover plate. Remove the paper exit tray. Hold the rib of the paper exit shifter with the fixing guide, and fix it with the fixing screw B (M4 x 10). (3) Paper pass unit attachment Remove the paper exit full detection actuator, and attach the reverse detection actuator.
  • Page 103 B. Finisher installation Insert the reverse tray along the groove in the left cabinet and the top surface of the right cover plate. (1) Operation manual storage cover replacement Remove the operation manual storage cover on the left side of the machine.
  • Page 104 (4) Height adjustment of the saddle finisher Fix the paper holding A with fixing screw A. Put the saddle finisher closer to the main unit, and check to insure that the guide pin is smoothly inserted into the connec- tion hole. Connection hole Guide pin Attach the saddle tray and paper holding B.
  • Page 105 Loosen the fixing screw of the adjustment section on the front Loosen four fixing screws of the adjustment section, and turn side. If the guide pin is inserted smoothly, tighten the fixing the height adjustment screws on the front/rear sides to adjust screws of the adjustment section on the front/rear sides.
  • Page 106 (6) Connector connection Attach the staple position label (for the RSPF). Connect the saddle finisher connector with the connector of the paper pass unit, and tighten the screw. Connect the saddle finisher connector with the connector of the main unit, and tighten the screw. C.
  • Page 107: Mx-Pnx5A/B/C/D (Punch Module)

    [25] MX-PNX5A/B/C/D (PUNCH MODULE) MX-3610N Service Manual 1. Unpacking Release the lock and separate the saddle finisher from the main unit. A. Packed items check 000-0000 B. Saddle finisher exterior removal Remove the rear cover. Name Quantity Punch unit Harness A (Purple) Harness B (Gray) Punch jam processing label Use the punch position labels bundled with the MX-FN10.
  • Page 108 Open the front cover and remove the front inner cover. Attach the punch unit to the saddle finisher. Fix the punch unit with the screw which was removed from the dummy punch guide. Before installing, remove the dust box. Check to confirm that the punch guide pin is securely inserted into the guide pin insertion hole of the finisher.
  • Page 109 D. Saddle finisher exterior attachment E. Saddle finisher connection Fix the front inner cover with screws, and close the front Install the saddle finisher to the main unit. cover. Connect the connector. Fix the front lower cover with a screw. Fix the rear cover with a screw.
  • Page 110 G. Punch position label attachment Attach the punch position label (for the scanner). No clearance Second label First label Fit with the corner R. Label attachment reference Fit with the corner R. * Corner of the upper cabinet bottom Attach the punch position label (for the RSPF). R2.5 line of tangency Ridge line R2.5 H.
  • Page 111: Mx-Tr12 (Exit Tray Unit)

    [26] MX-TR12 (EXIT TRAY UNIT) MX-3610N Service Manual 1. Unpacking Remove the right upper cabinet of the ADU. A. Packed items check Attach the right paper exit unit included in the package, and fix it with the screw. Connect the connector. Name Quantity Paper exit tray...
  • Page 112 B. Paper exit tray attachment Attach the paper exit tray and the full-detection actuator included in the package. Be careful of the installing direction of the full detection actua- tor. C. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch.
  • Page 113: Mx-Tr13 (Exit Tray Unit)

    [27] MX-TR13 (EXIT TRAY UNIT) MX-3610N Service Manual 1. Unpacking Remove the paper guide. A. Packed items check Attach the right paper exit unit included in the package, and fix it with the screw. Connect the connector. Name Quantity Paper exit tray Right paper exit unit Right paper exit cover Full detection actuator...
  • Page 114 B. Paper exit tray attachment Attach the paper exit tray and the full-detection actuator included in the package. Be careful of the installing direction of the full detection actua- tor. C. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch.
  • Page 115: Mx-Fwx1

    [28] MX-FWX1 (INTERNET FAX EXPANSION KIT) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM Product key sheet 2. Installation In the 20cpm machine, the function of this kit is enabled only when an option HDD is installed. In order to specify the address of the Internet Fax with the PC-FAX driver, the PC-FAX driver must be updated by the Internet Fax expansion kit.
  • Page 116: Mx-Amx1

    [29] MX-AMX1 (APPLICATION INTEGRATION MODULE) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM MX-AMX1 GETTING STARTED GUIDE Sharpdesk license kit Operation Manual 2. Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode.
  • Page 117: Mx-Amx2

    [30] MX-AMX2 (APPLICATION COMMUNICATION MODULE) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM Operation manual 2. Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 118: Mx-Amx3

    [31] MX-AMX3 (EXTERNAL ACCOUNT MODULE) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity CD-ROM Operation manual 2. Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 119: Mx-Am10

    [32] MX-AM10 (WEB BROWSING EXPANSION KIT) MX-3610N Service Manual 1. Unpacking A. Packed items check Name Quantity Operation manual (CD-ROM) Product key sheet 2. Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode.
  • Page 120 [33] Remote operation panel function Enable setting MX-3610N Service Manual General To use the remote operation panel function, the password for the remote operation panel function must be entered on the password input menu displayed on the VNC boot screen. Note that, therefore, the password must be set in advance to use the remote operation panel function.
  • Page 121: Setting, Adjustments, Operation Check

    [34] Setting, Adjustments, Operation check MX-3610N Service Manual Firmware version check and version After installation of all the options to the machine, use SIM22-5 to check the version of each firmware. If it is not the latest version, upgrade it to the latest one. Function and operation check Check that the following operations are normal.
  • Page 122: [35] Setup And Adjustment Data Recording

    [35] Setup and adjustment data recording MX-3610N Service Manual Print the various setup data and the adjustment data (list) with SIM22-6 and keep the data. • In case of a memory trouble, if the data are not kept, all the adjustments must be made again.
  • Page 123: Necessary Works Before Moving The Machine

    [36] Necessary works before moving the machine MX-3610N Service Manual If the following options are installed, remove all of them from the machine. • Large capacity tray • Finisher • Paper pass unit • Saddle finisher Remove the following consumable parts from the machine. •...
  • Page 124 LEAD-FREE SOLDER The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The alphabet following the LF mark shows the kind of lead-free solder. Example: <Solder composition code of lead-free solder> Solder composition Solder composition code Solder composition...
  • Page 125 CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 126 Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated. PCL is a registered trademark of the Hewlett-Packard Company. Sharpdesk is a trademark of Sharp Corporation. All other trademarks and copyrights are the property of their respective owners. SHARP CORPORATION...

This manual is also suitable for:

Mx-2310uMx-2610nMx-3110nMx-3610n

Table of Contents