Sharp MX-3610N User Manual page 690

IMAGE SEND
USES OF THE NETWORK SCANNER
The network scanner allows you to create an image file from the original data scanned by the
machine, and send the file over a network to a PC, FTP server, or other destinations. If
necessary, it scans the original using a TWAIN-compliant application on your PC.
The network scanner function provides the following scanning modes.
Scanner mode
Internet fax mode
Data entry mode
Scanner mode
The scanner function of the machine sends a scanned original as described below based on
the specification of the destination.
Scan to E-mail
A scanned file is attached to e-mail and sent.
Scan to FTP
The scanned file is sent to a specified folder of an FTP server.
When the file is sent, it is also possible to send an e-mail to a previously stored e-mail
address to inform the recipient of the location of the file.
Scan to Desktop
The scanned file is sent to a specified folder on your computer.
To use Scan to Desktop, software must be installed from the "Sharpdesk/Network
Scanner Utilities" CD-ROM that accompanies the machine. For the system requirements
of the software, see the manual (PDF format) or the Readme file on the CD-ROM. For the
procedures for installing the software, see the "Sharpdesk Installation Guide"
Scan to Network Folder
The scanned file is sent to a network folder on a Windows PC on the same network as
the machine.
When the file is sent, it is also possible to send an e-mail to a previously stored e-mail
address to inform the recipient of the location of the file.
For the operating procedure, see "SENDING AN IMAGE IN SCAN MODE".
Internet fax mode
The scanned file is sent as an Internet fax. Internet faxes are received if necessary.
MX-2610N / MX-3110N / MX-3610N