Sharp MX-3610N User Manual page 19

OPERATIONS COMMON TO ALL MODES
AUTO POWER SHUT-OFF TIMER
This mode turns off the power to the operation panel and the fusing unit, and makes the
machine wait in the lowest power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in waiting status
without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time
is longer.
The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.
Auto Power Shut-Off Timer is also activated
by pressing the [Power Save] button while
the [Power Save] button is not lit.
This mode is cleared when print data is
being received or when the [Power Save]
button is pressed while it is blinking.
To set Auto Power Shut-Off Timer:
In "Setting mode", select [Energy Save] → [Auto Power Shut-Off].
Index Contents
MX-2610N / MX-3110N / MX-3610N