Sharp MX-3610N User Manual page 63

OPERATIONS COMMON TO ALL MODES
PUNCH MODULE
Finisher installed
Saddle finisher installed
Finisher installed
< 6 steps in all >
Open the cover.
While pressing the lever
over to the left, slide the
finisher to the left until it
stops.
Gently slide the finisher until it stops.
Grasp the punch waste box
handle, gently pull out the
box, and discard the punch
waste.
Discard the punch waste in a plastic bag
or other container, taking care not to let
the waste scatter.
MX-2610N / MX-3110N / MX-3610N