Sharp MX-3610N User Manual page 580

FAX
PRINTING RECEIVED DATA AT A SPECIFIED TIME
You can start printing the received data at a
specified time.
For stress-free printing, you should avoid
printing large numbers of pages at peak
times during the day, and when you do not
urgently need to print.
The printed data is
automatically deleted from
memory.
If the power is turned off at the
specified time, printing will start
at the timing when the power
is turned on.
This function can be specified
when the Received Data
Image Check Setting is
enabled.
If Hold Setting for Received Data
Print is enabled, this function is
not available.
To print received data at the specified time:
In "Setting mode", select [System Settings] → [Image Send Settings] →
[Operation Settings] → [Default Settings] → [Time Specified Output of Received
Data].
To disable the hold setting for received data print:
In "Setting mode", select [System Settings] → [Image Send Settings] →
[Operation Settings] → [Default Settings] → [Hold Setting for Received Data
Print].
Index Contents
MX-2610N / MX-3110N / MX-3610N