Sharp MX-3610N User Manual page 108

OPERATIONS COMMON TO ALL MODES
SELECTING A PROCEDURE FOR PLACING THE ORIGINAL
DEPENDING ON THE TYPE AND STATUS OF THE ORIGINAL
Place the original in the automatic document feeder. Depending the type and status of the
original, use the document glass. Follow the instructions to select the method for placing the
original.
To place it in the automatic document feeder, see "AUTOMATIC DOCUMENT FEEDER".
If originals have damp spots due to correction fluid, ink or pasteup glue, wait until
the originals are dry before making copies. Otherwise the interior of the machine or
the document glass may be soiled.
Originals that can be placed in the automatic document
feeder by changing the setting or the placing manner:
Original containing pages of
different sizes
Set [Mixed Size Original] in "Others".
An original cannot be detected if all
pages are of the same size but some of
them are set in a different orientation.
Thin original 35 g/m
(9 lbs. to 14 lbs.)
Set [Slow Scan Mode] in "Others".
For this type, 2-sided scanning is
disabled.
Original with two or three filing
holes
Place the original so that the punched
edge does not fall on the feed slot of
the document feeder tray. Specify the
orientation of the original using [Original
Setting].
2 - 49 g/m 2
MX-2610N / MX-3110N / MX-3610N