Sharp MX-3610N User Manual page 683

FAX
COMPLETED FAX TRANSMISSION/RECEPTION JOBS
A usual transmission job moves to the job list when transmission is completed. Then the status
field displays "Send OK". However, received faxes, timer transmission faxes, retries, fax
forwarding, and other fax jobs are displayed in the job status screen as follows:
Fax reception jobs
When a fax is being received, the status field displays "Receiving" in the job queue list.
When reception is completed, the job moves to the completed job list and the status field
displays "In Memory". After the fax is printed, the status changes to "Received".
Timer transmission jobs
A timer transmission job appears at the end of the job queue list until the specified time is
reached.
The job is printed at the specified time, and moves to the completed job list. If another job is
being printed at the specified time, the job being printed is prioritized over the timer job.
Retry jobs
A retry job appears at the end of the job queue list.
Transmission of the retry job starts according to the [Recall in Case of Line Busy] setting in
"Setting mode". When the transmission is completed, the retry job moves to the completed job
list and the status changes to "Send OK".
Reception jobs when the inbound routing settings are enabled
When the inbound routing settings are enabled, reception jobs are handled as follows
depending on the print setting.
FORWARDING RECEIVED DATA TO PRESET DESTINATIONS (Inbound routing
settings)
Received data is not printed
When a data is being received, "Receiving" appears in the job queue list. When the reception
is completed, the status changes to "Waiting".
Received Internet fax is printed
When reception is completed, the status field displays "In Memory" in the completed job list.
MX-2610N / MX-3110N / MX-3610N