Sharp MX-3610N User Manual page 137

OPERATIONS COMMON TO ALL MODES
SETTING THE SCOPE FOR PUBLICIZING CONTACTS AND
GROUPS
Limiting the scope to the user
Limiting the scope to the specified user group
Limiting the scope to the user
< 2 steps in all >
In the address registration screen, tap the [Address Public
Setting] tab and then tap the [Designate Public Address.]
key.
Check that the [User List] is checked and your user name is
selected.
After the settings are completed, tap
If you have logged in as the administrator, select any user name desired from the
user list.
To register a user:
In "Setting mode", select [User Control] → [User List] → [Register User].
Limiting the scope to the specified user group
< 2 steps in all >
In the address registration screen, tap the [Address Public
Setting] tab and then tap the [Designate Public Address.]
key.
Tap the [Organization/Group] tab and select a user group to
which you want to open addresses.
After the settings are completed, tap
.
.
MX-2610N / MX-3110N / MX-3610N