Sharp MX-3610N User Manual page 587

FAX
FORWARDING RECEIVED DATA TO
PRESET DESTINATIONS
16
< steps in all >
In "Setting mode (Web version)", click [Application Settings]
→ [Inbound Routing Settings] → [Administration Settings].
In "Forward Received Data", select [Valid] and click the
[Store] button.
Users without administrator rights can be prohibited from storing, editing, and
deleting forwarding tables in this screen, and from specifying which table is used.
To do so, set the checkboxes for the following items to
Disable Registration of Forward Table
Disable Change/Delete of Forward Table
Disable Change of Forward Approval
Specify in [Print Style Setting] whether or not to have the machine to print the
faxes to forward when inbound routing is enabled. After the settings are
completed, be sure to click the [Store] button.
[Always Print]: Always prints received data before forwarding the data.
[Print at Error]: Prints received data only when an error prevents forwarding.
[Save Only at Error]: Saves received data only when an error prevents
forwarding. For the saved data, the error address can be confirmed and the
data can be resent. From the [Scanner] or [Fax] tab in the job status screen,
tap the [Check error box of forwarding received data] key on the action panel.
Click [Sender Number/Address Registration] in the [Inbound
Routing Settings] menu in the "Setting mode (Web
version)".
Enter the sender address or fax number in "Internet Fax
Address" or "Fax Number" as appropriate, and click the
[Add to List] button.
The entered address will be added to the "Entered sender address or fax number" list.
Enter the address directly (maximum of 1500 characters) or select the address from a
global address book by clicking the [Global Address Search] button.
MX-2610N / MX-3110N / MX-3610N
Inbound routing
settings
.