Sharp MX-3610N User Manual page 234

1-sided copy 1-sided copy
1-sided copy 2-SIDED
COPY
2-SIDED 1-sided copy
COPY
2-SIDED 2-SIDED
COPY COPY
Before using the covers/inserts function, load insertion sheets in the tray.
When selecting the covers/inserts function, place the originals in the document
feeder tray, select 1-sided or 2-sided copying, and select the number of copies
and any other desired copy settings. When these settings have been completed,
perform the procedure to select covers/inserts.
One sheet can be inserted for each of front and back covers.
When performing 2-sided copying of 2-sided originals, an insertion sheet cannot
be inserted between the front and reverse sides of an original.
This function cannot be used in combination with the saddle stitch function.
This setting is not available when the covers/inserts function is disabled in
"Setting mode".
Inserts a front cover at the beginning of copies, and makes
a 2-sided copy on the fifth and sixth original pages for back
cover.
Makes a 1-sided copy on the first original page for front
cover, and also makes a 1-sided copy on the sixth original
page for back cover. The second and the fifth original
pages are not copied.
Makes a 1-sided copy on the first original page for front
cover, and also makes a 2-sided copy on the fifth and sixth
original pages for back cover.
* The second original page is not copied.
Makes a 2-sided copy on the first and second original
pages for front cover, and also makes a 1-sided copy on
the sixth original page for back cover.
* The fifth original page is not copied.
Makes a 2-sided copy on the first and second original
pages for front cover, and also makes a 2-sided copy on
the fifth and sixth original pages for back cover.