Sharp MX-3610N User Manual page 209

COPYING
ERASING PERIPHERAL SHADOWS FOR
COPYING
6
< steps in all >
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Tap the [Others>>] key, and tap the [Erase] key.
Tap the checkbox of the
edge that you wish to
erase, and specify the
erase position.
Check that he tapped checkbox is set to
.
If the [Specify Frame] key is tapped, the
[Up], [Down], [Left], and [Right]
checkboxes are set to
If the [Specify Frame+Centre] key is
tapped, all the checkboxes are set to
Specify the erase edge on the reverse side when erasing edges of one to three
sides of Up, Down, Left, and Right on the front side to scan a 2-sided original.
If the [Reverse erase position of back face.] checkbox is set to
the position opposite to the erased edge on the front side will be erased.
If the [Reverse erase position of back face.] checkbox is set to
the same position as on the front side will be erased.
Specify the erase width.
Tap the numeric value display indicating the margin shift area on the front side
or reverse side, and enter the area using the numeric keys.
.
.
MX-2610N / MX-3110N / MX-3610N
Erase
, the edge in
, the edge in