Sharp MX-3610N User Manual page 882

DOCUMENT FILING
BATCH PRINTING
8
< step in all >
Tap the [Batch Print] key.
Tap the [User Name] text
box.
Select the user name.
After selecting the user name, tap
If you have selected [System Settings] in "Setting mode" → [Document Filing
Settings] → [Batch Print Settings] and disabled the [Selection of [All Users] is not
allowed.] checkbox and [Selection of [User Unknown] is not allowed.] checkbox,
select the [All Users] key and [User Unknown] key.
If you tap the [All Users] key, all files in the folder (the files of all users) are
selected.
If you tap the [User Unknown] key, all files in the folder with no user name
specified are selected.
If a password has been established, tap the [Password] key.
Enter the password (5 to 8 digits) using the numeric keys and tap the [OK] key. Only files
that have the same password will be selected.
If you do not wish to enter a password, go to the next step.
When not printing with the number of copies at data saving,
tap the [Apply the Number from Stored Setting of Each Job.]
checkbox to set to
.
.
MX-2610N / MX-3110N / MX-3610N