Sharp MX-3610N User Manual page 291

COPYING
ADJUSTING THE COLOUR
5
< steps in all >
Tap the [Others>>] key, and tap the [Colour Balance] key.
Tap the tab of the colour
you want to adjust.
Tap the
the slider to adjust the
colour balance.
To individually adjust eight sliders, set
the [Set in a Batch] checkbox to
slide the control of each slider.
When using the
individually adjust eight sliders, tap the
required slider and tap the
As necessary, tap the tab of
each colour, and repeat this step.
To return the current colour balance to the default:
Tap the [Size Reset] key.
To return all colour balances to defaults:
Tap the [Cancel All] key. The values of all eight gradations will return to the
default colour balance values.
The default colour balance is set by selection of [System Settings] in "Setting
mode" → [Copy Settings] → [Colour Adjust] → [Initial Colour Balance Setting].
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
key or slide
, and
key to
key.
Colour Balance Setting
MX-2610N / MX-3110N / MX-3610N
Colour balance