Sharp MX-3610N User Manual page 824

IMAGE SEND
INFORMATION APPEARING IN THE RESULT COLUMN
Error types and other information are printed in the result column of transaction and activity
reports. When a transaction or activity report is printed, check the result of the transaction in
the result column and take action as needed.
Examples of messages that are printed in the result column
Message
OK
OK REPORT
CANCEL
MEM. FULL
Reject Reception
NG REPORT
NO REPORT
NG LIMIT
E-mail
FAIL xx (xxxx)
Index
Description
The transaction was completed normally.
A receive report was requested for a transmission, the transmission
was completed normally, and the receive report was received from
the destination.
A transmission was stopped while in progress, or a reserved
transmission job was cancelled.
The memory became full during reception.
An Internet fax was sent from a party that is blocked.
A receive report was requested for a transmission, however, the
transmission did not take place correctly and a transmission failed
report was received.
A receive report was requested for a transmission, however, a report
was not received within the timeout time.
Transmission was not possible because the file size exceeded the
machine's file size limit setting.
An e-mail was received, however, the attached file was not a TIFF-F
file or there was no attached file, and thus printing was not possible.
The transaction failed due to a communication error.
First 2 digits of communication error number: Error code from 00 to
99.
Last 4 digits of communication error number: Code for use by service
technicians.
Contents
MX-2610N / MX-3110N / MX-3610N