Sharp MX-3610N User Manual page 16

OPERATIONS COMMON TO ALL MODES
TURNING ON THE POWER
This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower
left corner, and the [Power] button on the operation panel.
Turning on the power
Turn the main power switch to the "
position.
The main power indicator will light in
orange. The [Power] button does not
function while the main power indicator
is lit in orange.
After the main power indicator lights in
green, press the [Power] button.
Turning off the power
Turn off the power by pressing the [Power]
button, then turn the main power switch to
the " " position.
Restart the machine.
Turn off the power by pressing the [Power]
button and then press it again to turn on the
power.
When turning off the main power switch, press the [Power] button on the
operation panel and then turn the main power switch to the "
In a sudden case of main power outage , turn the power for the machine back
on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off
prior to the [Power] button is turned off, abnormal noises, degraded image quality
or other problems may result.
Turn off both the [Power] button and the main power switch and unplug the
power cord if you suspect a machine failure, if there is a bad thunderstorm
nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch
in the "
"
" position.
MX-2610N / MX-3110N / MX-3610N
"position.