Sharp MX-3610N User Manual page 730

IMAGE SEND
SENDING THE SAME IMAGE TO MULTIPLE
DESTINATIONS
Send the same scanned image to multiple
scan, Internet fax, and fax mode destinations
in a single operation.
Up to 500 destinations can be sent in one
broadcast operation.
It is convenient to store destinations you frequently use for broadcast transmission as contacts
or groups.
A maximum of 500 destinations can be stored in one contact. For broadcast transmission, the
contact or group key can be simply tapped to retrieve multiple fax numbers.
You can also send faxes with the one-touch key by setting the [Set to the address as usually
used] checkbox to
destination from the stored addresses, open the detail confirmation screen and remove the
destination in the screen.
A transmission is performed, ignoring hyperlinks with Scan to FTP and Scan to
Network Folder addresses.
If the original is colour and the colour mode is set to "Full Colour", the original is
sent in Mono2 to Internet fax or fax mode destinations. A long original is also
sent in Mono2.
If you wish to send the same image as fax to all destinations, tap the [Send
Same Image as Fax Address] key on the action panel.
To register destinations in a contact or group:
In the base screen or address book screen, tap the [Register/Edit Address] key on
the action panel, or tap the [Register/Edit Address in Address Book] icon in the
home screen. For more information, see "STORING CONTACTS" or "STORING
GROUPS".
Index
when addresses are registered. If you wish to temporarily remove a
Contents
MX-2610N / MX-3110N / MX-3610N
Broadcast
transmission
Operation