Sharp MX-3610N User Manual page 49

OPERATIONS COMMON TO ALL MODES
DOCUMENT GLASS
3
< steps in all >
Open the automatic document feeder.
Load the paper with the
print side facing down.
Place the original face down and align
the top left corner of the original with
back left (at the tip of the mark
document glass.
Do not place any objects under
the original size detector.
Closing the automatic document
feeder with an object underneath
may damage the original size
detector or disable correct
detection of the original size.
When placing a non-standard size original on the document glass, the size can be
detected easily if a blank sheet of A4 (8-1/2" x 11"), B5 (5-1/2" x 8-1/2"), or other
standard size paper is placed on top of the original.
Close the automatic document feeder.
After placing the original, close the automatic document feeder. If the unit is left open, parts
outside of the original will be copied in black, causing excessive use of toner.
Index
) of the
Contents
MX-2610N / MX-3110N / MX-3610N
Overview