Sharp MX-3610N User Manual page 721

IMAGE SEND
CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND BODY
TEXT AT THE TIME OF SCAN TRANSMISSION
8
< steps in all >
Tap [Others>>], and tap the [Send Settings] key.
To change the subject, tap
the [Subject] entry box.
Tap a pre-set text key.
After the settings are completed, tap
To cancel the selection of the
subject:
Tap the [Clear] key.
If you wish to directly enter the
text, tap the [Direct Entry] key to
open the soft keyboard.
Enter the text and tap the [OK]
key.
To change the file name, tap the [File Name] entry box.
After the settings are completed, tap
Tap the key of the file name from the list.
To directly enter the file name, tap the [Direct Entry] key.
To change the reply address, tap the [Reply-To] entry box.
If user authentication is being used, the information of the user that logged in will
be applied, and thus the reply address cannot be changed.
Tap the key that you wish to use for the reply address.
.
.
MX-2610N / MX-3110N / MX-3610N