Sharp MX-3610N User Manual page 72

To enable external authentication mode:
In "Setting mode", select [System Settings] → [Sharp OSA Settings] → [External
Account Setting] and enable the [Enable Authentication by External Server]
checkbox.
The user control function of the machine cannot be used in external
authentication mode.
However, "User Registration", "User Count Display", "User Count Reset", "User
Information Print", and "The Number of User Name Displayed Setting" can be
used.
The mode select key cannot be used while the login screen appears.
If login fails:
If the login screen fails to appear or the application does not operate correctly, the machine
may also stop operating correctly. In that case, terminate external account mode forcibly.
To forcibly terminate external account mode:
In "Setting mode (Web version)", select [System Settings] → [Sharp OSA Settings]
→ [External Account Setting].
If termination in Setting mode (Web version) fails, terminate it forcibly on the
operation panel of the machine.
In "Setting mode", select [System Settings] → [Sharp OSA Settings] and change
the setting for [External Account Setting] and then restart the machine. To restart
the machine, see "TURNING ON THE POWER".
External count mode
Unlike in external authentication mode, when the machine is started in "external count mode",
the login screen of the external account application is not displayed after the machine has
started up. Only the job result is sent to the external account application.
External count mode can be used together with the user control function of the machine.
(External count mode can also be used when the user control function is disabled.)
To enable external count mode:
In "Setting mode", select [System Settings] → [Sharp OSA Settings] → [External
Account Setting] and enable the [External Account Control] setting alone.
Index Contents