Sharp MX-3610N User Manual page 321

Tap the [Repeat Number]
key to set a repeat count.
After the settings are completed, tap
The automatic calculation result is shown
as the copy ratio.
If the calculated copy ratio exceeds the range from 25% to 400%, an error occurs.
Specify the repeat partition line.
After the settings are completed, tap
To cancel the fixed repeat setting:
Tap the [Off] key.
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:
Tap the [CA] key.
Tap the [Colour Start] or [B/W Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
To make two or more copies,
tap the copies display key to set a number of copies.
.
and [<<Back] keys in sequence.