Sharp MX-3610N User Manual page 962

SETTING MODE
NETWORK STATUS
The Network Status screen shows the general status information and the statuses relevant to,
TCP/IP, NetWare, EtherTalk, and NetBEUI protocols.
Item
General
TCP/IP
Description
Displays the information common to the
network.
Link Status: Displays the data transfer
rate of the NIC and cable information.
Duplex Mode: Displays the duplex
mode of the NIC.
Hardware Address: Displays the
MAC address of the NIC.
Print Status on Startup: Displays
whether or not status is printed upon
startup.
Device Name: Displays the device
name.
Domain: Displays the domain name.
Displays the current status of the TCP/IP
protocol.
IPv4 Settings: Displays the IPv4
protocol settings.
DHCP/BOOTP: Selects whether or
not the IP address is obtained from
the DHCP/BOOTP server.
RARP: Displays the status of the
RARP protocol.
IPv4 Address: Displays the IPv4
address.
Subnet Mask: Displays the
current subnet mask.
Default Gateway: Displays the
current default gateway.
IPv6 Settings: Displays the IPv6
status.
DHCPv6: Displays the status of
the DHCPv6 server.
MX-2610N / MX-3110N / MX-3610N