Sharp MX-3610N User Manual page 629

original sheet was scanned, not "2" to
indicate the front-side page and the
reverse side page.
Tap the [OK] key to start transmission.
If this function is combined with [Job Build], the count result is displayed after the
[Read-End] key has been tapped.
If the displayed number of original sheets is different from the actual number of
sheets:
Tap the [Cancel] key and then tap the [OK] key in the message screen to clear all
scanned data. Scan settings and destination settings will not be cleared. Insert the
original sheets in the document feeder tray again and tap the [Start] key to re-scan.
Index Contents Overview