Sharp MX-3610N User Manual page 229

COPYING
INSERTING COVERS IN COPIES
This function inserts a different type of paper into the pages corresponding to the front and
back covers of a copy job.
It is helpful when you want to change cover paper to make resources look better.
Configure insertion sheet settings if needed.
When inserting insertion sheets, see "INSERTING INSERTION SHEETS IN
COPIES".
Copying on a front cover and inserting together with a back cover
Cover inserting examples
The following shows the copy results when
front and back covers are inserted into six 1-
sided original pages or three 2-sided original
pages in the four copy modes below.
1-sided copying of 1-sided originals
Setting conditions for
each cover
Front cover Back cover
Not copied Not copied
Copy modes
1-sided copying of 1-sided originals
2-sided copying of 1-sided originals
1-sided copying of 2-sided originals
2-sided copying of 2-sided originals
Resulting copies
Inserts cover sheets at the beginning and end of copies.
MX-2610N / MX-3110N / MX-3610N
Covers/inserts