FAX
RELAY REQUEST TRANSMISSION USING F-CODES
6
<
steps in all >
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination.
ENTERING DESTINATIONS
If the sub-address and passcode are stored in the one-touch key, it is not
necessary to take steps 3 to 5. Go to step 6.
Tap the [Sub Address] key.
Enter "/".
Enter the sub-address using the numeric keys.
Tap the [Sub Address] key.
Enter "/".
If a passcode has been omitted in the memory box of the destination machine, it is
not necessary to take steps 6 and 7.
Tap the [Start] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For
more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
Scanning begins.
MX-2610N / MX-3110N / MX-3610N