Sharp MX-3610N User Manual page 34

When [Disabling of Duplex] is set for "Letter Head" or "Pre-Printed", set the print
side in the same orientation as for the ordinary operation.
To set [Disabling of Duplex]:
In "Setting mode", select [System Settings] → [Device Control] → [Disabling of
Duplex].
Paper that cannot be used
Special media for an ink jet printer
(fine paper, glossy paper, glossy film,
etc.)
Carbon paper or thermal paper
Pasted paper
Paper with clips
Paper with fold marks
Torn paper
Oil-feed transparency film
Non-recommended paper
Iron-on transfer paper
Japanese paper
Perforated paper
Index
Thin paper less than 55 g/m
Heavy paper as thick as 257 g/m
lbs) or more
Irregularly shaped paper
Stapled paper
Damp paper
Curled paper
Paper whose print side or reverse side
has been already printed on by another
printer or multifunction device.
Paper with a wave-like pattern due to
moisture absorption
Contents
2
(15 lbs)
2
(69