Sharp MX-3610N User Manual page 91

(1) Pull the right-hand side of the
cleaning tool to detach it from the hook.
(2) Put it over the hook to place it on the
back side.
(3) Turn the cleaning tool around the
boss to detach it from the left hand hook.
Make sure that the cleaner
at the tip of the cleaning
tool is not dirty.
If the cleaner is dirty, remove the cleaner
from the cleaning tool and replace it with
a clean one. For the procedure for
replacing the cleaner, see steps 5
through 7. If the cleaner is not dirty, go
to step 8.
Open the inner cover and
take out a replacement
cleaner.
Replacement cleaners are stored on the
inner cover.
Grasp the end of the cleaner and pull it
out of the cover.
Remove the dirty cleaner
from the tip of the cleaning
tool.
While firmly grasping the tool where the
cleaner is attached, use your other hand
to press down on the hook that secures
the cleaner, and remove the cleaner.