Sharp MX-3610N User Manual page 771

IMAGE SEND
ERASING PERIPHERAL SHADOWS ON THE
IMAGE
6
< steps in all >
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination.
ENTERING DESTINATIONS
Tap the [Others>>] key, and tap the [Erase] key.
Tap the checkbox of the
edge that you wish to
erase, and specify the
erase position.
Check that he tapped checkbox is set to
.
If the [Specify Frame] key is tapped, the
[Up], [Down], [Left], and [Right]
checkboxes are set to
If the [Specify Frame+Centre] key is
tapped, all the checkboxes are set to
Specify the erase edge on the reverse side when erasing edges of one to three
sides of Up, Down, Left, and Right on the front side to scan a 2-sided original.
If the [Reverse erase position of back face.] checkbox is set to
the position opposite to the erased edge on the front side will be erased.
If the [Reverse erase position of back face.] checkbox is set to
the same position as on the front side will be erased.
.
.
MX-2610N / MX-3110N / MX-3610N
Erase
, the edge in
, the edge in