Sharp MX-3610N User Manual page 811

IMAGE SEND
ADDING CONTRAST TO THE SCANNED
ORIGINAL BEFORE TRANSMISSION
5
< steps in all >
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the
document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination.
ENTERING DESTINATIONS
Tap the [Others>>] key, and tap the [Contrast] key.
Tap or slide the slider
to adjust the contrast level.
To cancel the contrast
settings:Tap the [Off] key.
After the settings are completed, tap
and [<<Back] keys in sequence.
Tap the [Start] key to start scanning of the original.
Tap the [Preview] key to check the preview of an image before sending a fax. For
more information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However,
settings for this function cannot be changed in the preview screen.
If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
If you placed the original on the document glass, scan each page one at a time.
MX-2610N / MX-3110N / MX-3610N
Contrast