Sharp MX-3610N User Manual page 528

FAX
FAX TRANSMISSION METHODS
The methods that can be used to send a fax
from the machine are described below.
Select the method that best suits your
needs.
To fax a large number of sheet originals:
Use the automatic document feeder.
The originals will be scanned into memory
and then transmitted (memory transmission).
When multiple original sheets are placed in
line idle state, they will be sent in sequence
from the scanned page in parallel with the
scanning process (Quick On Line Sending).
If transmission cannot begin immediately
because the line is in use, all pages will be
scanned into memory and the transmission
will be reserved.
USING THE AUTOMATIC DOCUMENT
FEEDER FOR TRANSMISSION
When a fax transmission or reception is already in progress, the following procedure is
available to reserve a transmission job. To check reserved transmission jobs, display the job
status screen.
FAX JOBS
If memory becomes full while the first original page is being scanned,
transmission will stop.
When the transmission is finished, the scanned original pages are cleared from
memory. However, when the document filing function is used, the transmitted fax
is stored.
You can also send a fax by placing originals in both the automatic document
feeder and on the document glass. Original pages are then scanned and sent in
sequence. This sending method may not be available depending on the function.
To fax a large number of sheet
originals:
To fax thick originals or pages of a
book:
If you wish to send a fax ahead of other
previously reserved fax transmissions:
MX-2610N / MX-3110N / MX-3610N