Sharp MX-3610N User Manual page 673

FAX
RELAY REQUEST TRANSMISSION USING F-CODES
This function sends a fax to an F-code relay broadcast memory box in another machine and
have that machine relay the fax to multiple destination machines.
When the destination machines are far from your machine, sending the fax to a relay machine
that is close to the destination machines can help reduce telephone charges. A relay request
transmission can be used in combination with the timer transmission function to further reduce
cost.
SENDING A FAX AT A SPECIFIED TIME (TIMER TRANSMISSION)
F-code (sub-address and passcode) and the destination in the F-code relay
broadcast memory box of the recipient machine should be verified by the
recipient in advance.
Before using this function, program the destination machines in the F-code relay
broadcast memory box in the relay machine.
It is not necessary for the destination machines to support F-code
communication.
Your machine (the machine that requests a relay broadcast transmission) only
bears the cost of sending the fax to the relay machine. The relay machine bears
the cost of sending the fax to each of the destination machines.
If necessary, this function can be used in combination with a broadcast
transmission or timer transmission. It is convenient to store this function in a
program.
MX-2610N / MX-3110N / MX-3610N