Sharp MX-3610N User Manual page 36

OPERATIONS COMMON TO ALL MODES
LOADING PAPER INTO A TRAY
4
< steps in all >
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a
different size of paper, go to the next
step.
Keep holding the handle until the
lock is released.
Adjust guide plates A and B
by squeezing their lock
levers and sliding them to
match the longitudinal and
transversal dimensions of
the paper to be loaded.
The guide plates A and B are slidable.
Slide each guide plate while squeezing
its lock lever to adjust to the paper size.
Insert the paper into the
tray.
Load the paper with the print side facing
up. The stack must not be higher than
the indicator line (maximum of 500
sheets).
Fan the paper well before loading
it. If the paper is not fanned,
multiple sheets may feed at once
and cause a misfeed.
Gently push the paper tray
MX-2610N / MX-3110N / MX-3610N