Sharp MX-3610N User Manual page 60

Insert a new staple
cartridge into the staple
case as shown.
Push the staple cartridge in until it clicks
into place.
Replace the staple case.
Push the staple case in until it clicks into
place.
Push the saddle finisher
back and latch it to the
machine.
Gently slide the finisher back to the right
until it locks into its original position.
Close the front cover.
Make a proof copy in staple sort function to verify that stapling takes place
correctly.
Replacing the staple cartridge (saddle stitch unit)
Before starting this procedure, remove all output from the output tray of the saddle finisher. Do
not replace removed output back in the output tray.
< 4 steps in all >
Open the side cover.