Sharp MX-3610N User Manual page 745

IMAGE SEND
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC
VALUES
4
< steps in all >
Tap the [Original] key.
After tapping the "Scan
Size" key, tap the [Direct
Entry] key.
Specify the original size.
Tap the areas displaying width
and height sizes respectively,
and enter the sizes using the
numeric keys.
It is convenient to use
to finely adjust the entered
size.
Tap the [OK] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap
Index
twice.
Contents
MX-2610N / MX-3110N / MX-3610N
Overview