Sharp MX-3610N User Manual page 677

FAX
RELAY BROADCAST TRANSMISSION USING F-CODES
When your machine receives an F-code relay request transmission, the fax is received and
stored in an F-code relay broadcast memory box in your machine.
Your machine then relays the fax to each of the destination machines programmed in the
memory box. Transmission to the destination machine takes place automatically.
Prior to carrying out the operation, inform the requesting party, who you will
communicate with using F-code relay request transmission, of the sub-address
and passcode of the F-code relay broadcast memory box in your machine
Program the destination machines in the F-code relay broadcast memory box
when you create the box in your machine.
CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE
COMMUNICATION
It is not necessary for the destination machines to support F-code
communication.
The machine that requests a relay broadcast transmission only bears the cost of
sending the fax to your machine (the relay machine). Your machine bears the
cost of sending the fax to each of the destination machines.
When faxes forwarded using this function are printed at the forwarding destination,
the date and time of reception cannot be printed on the faxes. ("Receiving Date &
Time Print" is disabled.)
Index Contents
MX-2610N / MX-3110N / MX-3610N