Sharp MX-3610N User Manual page 733

IMAGE SEND
SETTING MODES WHEN MULTIPLE TYPES OF ADDRESSES
ARE INCLUDED IN A BROADCAST TRANSMISSION
This section explains settings you should bear in mind if multiple types of addresses are
included in a broadcast transmission.
When a broadcast transmission includes a mix of several types of addresses (such as scan
mode and Internet Fax mode destinations), its settings are enabled for all addresses
regardless of which mode screen is used to configure them. Note the following exceptions:
Send size
Resolution
(image)
File format (file
compression
mode)
Colour scanning
Original count
Scan file size
2in1
When the file format is set to [TIFF-S] in Internet fax mode,
transmission is only possible in A4R (8-1/2" x 11"R) size.
If an original larger than A4 (8-1/2" x 11") is scanned, it will
automatically be reduced to A4R before transmission.
Pages are sent using settings configured in each mode.
The compression mode set with [System Settings] → [Image Send
Settings] → [Scan Settings] → [Scan Settings] → [Compression Mode
at Broadcasting] in "Setting mode" is used for all destinations.
In scan mode, if the colour mode setting is [Full Colour], the original is
sent in Mono2 to Internet fax destinations and in colour to scan
destinations.
If the facsimile expansion kit is enabled, tap the [Send Same Image
as Fax Address] key on the action panel to send the original in
Mono2.
If the Internet fax expansion kit is enabled, tap the [Send Same Image
as Fax Address] key on the action panel to send an original having
the same settings as those for the Internet fax address. (This key
cannot be used if the facsimile expansion kit is enabled.)
An address of a mode in which the number of original sheets are
specified, if it exists, is enabled.
If a broadcast transmission is performed that includes destinations for
which an attachment size limit has been set using [Maximum Size of
E-mail Attachments] or [Maximum Size of Data Attachments
(FTP/Desktop/Network Folder)] (in "Setting mode", select [System
Settings] → [Image Send Settings] → [Scan Settings] → [Scan
Settings] → [Compression Mode at Broadcasting]), the limit will also
apply to destinations for which a limit is not set.
This mode is available only for Fax and Internet Fax. It is linked to a
mode with an appropriate function.
MX-2610N / MX-3110N / MX-3610N