FAX
CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE
COMMUNICATION
Before the F-code communication function
can be used, special memory boxes must be
created in "Setting mode".
Set the box name and F-code (sub-address
and passcode) in each memory box, and
store them.
After you have created a memory box, notify
the other party of F-code communication of
the sub-address and passcode of the box.
To create F-code memory boxes:
In "Setting mode", select [System Settings] → [F-Code Memory Box].
To use the following F-code communication
functions, F-code memory boxes must be
created in your machine.
F-code confidential reception
F-code polling memory
F-code relay broadcast transmission
Index
To use the following F-code communication
functions, F-code memory boxes must be
created in the other machine.
F-CODE CONFIDENTIAL
TRANSMISSION
F-code polling reception
F-code relay request transmission
Contents
MX-2610N / MX-3110N / MX-3610N