Setting Up The Pedals And Audio Connections - Korg Pa4X User Manual

16| Let's start!
02 Setting up the pedals
and audio connections
Connecting the pedals
Connecting the damper pedal
Use the PEDAL > DAMPER
(optional) KORG PS1, PS3 or DS1H. The DS1H pedal supports all the nuances
of half-pedaling on some acoustic piano sounds. You can experiment how it
works by gradually pressing it down, and gradually releasing it, while playing
the Concert Grand
If you need to change the pedal's polarity and calibrate it, go to the
Controllers > Foot
Connecting a pedal or footswitch
Use the PEDAL > ASSIGNABLE
the (optional) KORG PS1, PS3 or DS1H, or a continuous pedal like the (op-
tional) KORG XVP-10 Volume pedal or EXP-2 Expression pedal.
By default, this connector will work as an Expression pedal. If you want to
change the assigned function, or you need to change the pedal's polarity
and calibrate it, go to the
What if the pedals do not behave correctly?
If needed, you might want to recalibrate the pedals. Or you might need to
reverse the pedal's polarity. See how to do in
ting its polarity
connector to connect a damper pedal, like the
Sound.
page.
connector to connect a footswitch pedal like
Global > Controllers > Foot
on page 833.
page.
Calibrating the pedal and set-
Global >