Setting Up The Pedals, Audio Connections, Music Stand - Korg Pa1000 Quick Manual

02 Setting up the pedals,
audio connections, music
stand
Connecting the pedals
Connecting the damper pedal
Use the PEDAL > DAMPER
(optional) KORG PS1, PS3 or DS1H. The DS1H pedal supports all the nuances
of half-pedaling on some acoustic piano sounds. You can experiment how it
works by gradually pressing it down, and gradually releasing it, while playing
the Concert Grand
If you need to change the pedal's polarity and calibrate it, go to the
Controllers > Foot
Connecting a pedal or footswitch
Use the PEDAL > ASSIGNABLE
the (optional) KORG PS1, PS3 or DS1H, or a continuous pedal like the (op-
tional) KORG XVP-10 Volume pedal or EXP-2 Expression pedal.
By default, this connector will work as an Expression pedal. If you want to
change the assigned function, or you need to change the pedal's polarity
and calibrate it, go to the
What if the pedals do not behave correctly?
If needed, you might have to calibrate the pedals to use their full range of
values, without any 'dead spot'. Also, this procedure allows to choose the
pedal's polarity.
connector to connect a damper pedal, like the
Sound.
page.
connector to connect a footswitch pedal like
Global > Controllers > Foot
Connecting the pedals |13
page.
Global >