Displaying Router Environment Information - Cisco ASR 9000 Series User Configuration Manual

Managing the Router Hardware
0/RSP0/CPU0
0/1/CPU0
0/4/CPU0
0/6/CPU0
The node-id appears in the rack/slot/module notation, and the node-id components are as follows:
• rack —In a single-shelf system the rack number is always "0."
• slot —Number of the physical slot in which the card is installed.
• module —Subslot number of a system hardware component.
Table 15: Node ID Components, on page 108

Displaying Router Environment Information

The show environment command displays hardware information for the system, including fan speeds, LED
indications, power supply voltage and current information, and temperatures.
The syntax for the show environment command is:
show environment [options]
You can use the show environment command options to limit the detail in the command display. To view
the command options, enter the show environment ? command. The following example shows the full
environment status report:
RP/0/RSP0/CPU0:router(admin)# show environment
Mon Jun 29 04:32:07.587 PST
Temperature Information
---------------------------------------------
R/S/I
0/1/*
0/RSP0/*
0/4/*
0/6/*
0/FT0/*
0/FT1/*
Voltage Information
---------------------------------------------
R/S/I
0/1/*
A9K-RSP-4G(Active)
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
Modules Inlet
Temperature
(deg C)
host 31.5
host 26.6
host 29.8
host 32.7
host 27.2
host 27.4
Modules Sensor
host IBV
host 5.0V
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Displaying Router Environment Information
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
summarizes the node-id argument for each type of card.
Hotspot
Temperature
(deg C)
39.5
36.6
38.8
42.0
28.2
30.2
(mV) Margin
10647 n/a
4929 n/a
109