Show Policy-Map Interface - Cisco NCS 540 Series Routers Command Reference Manual

Congestion Management Commands

show policy-map interface

To display policy information and statistics for all classes configured for all service policies on the specified
interface, use the show policy-map interface command in XR EXEC mode.
show policy-map[interface {interface type| all} interface-path-id][{input |output }]
Syntax Description
interface type
all
interface-path-id
input
output
None
Command Default
XR EXEC mode
Command Modes
Command History
Release
Release 6.0
The show policy-map interface command displays the statistics for classes in the service policy attached to
Usage Guidelines
an interface.
The show policy-map interface command does not display the statistics and counters for the egress marking
policy.
Task ID
Task
ID
qos
Examples
This sample output shows how to display policy statistics information for all classes on the
interface hundredGigE 0/6/0/18 that are in the input direction:
Operations
read
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers

show policy-map interface

Interface type. For more information, use the question
mark (?) online help function.
Specifies all interfaces.
Physical interface or virtual interface.
Use the show interfaces command to see
Note
a list of all interfaces currently configured
on the router.
For more information about the syntax for the router,
use the question mark (?) online help function.
(Optional) Displays per class statistics on inbound
traffic for the specified policy map and interface.
(Optional) Displays per class statistics on outbound
traffic for the specified policy map and interface.
Modification
This command was introduced.
55