Modified Constants Menu (-Verify-); Auto-Tuning Menu (-A.tune-); Modified Constants Menu Access Procedure - YASKAWA F7 User Manual

http://www.aotewell.com

Modified Constants Menu (-VERIFY-)

This menu is used to set/read the parameters that have been modified from their original factory default settings. Follow the
key operations below (Fig 3.8) to access the Modified Constants Parameter Menu.
Note 1: If there are no parameters that have been modified from their original factory default settings, then the display will
state "None Modified". Otherwise, use

Auto-Tuning Menu (-A.TUNE-)

This menu is used to Auto-Tune the Drive in order to calculate the required motor parameters to optimize motor performance.
Ideally, perform Auto-Tuning with the motor uncoupled from the load.
When the motor cannot be disconnected from the load, perform static or terminal resistance Auto-Tuning. To set motor
parameters by hand calculation, contact your Yaskawa representative. Follow the key operations below (Fig 3.9) to access the
Auto-Tuning Menu.
Tel: +(86) 755 8660 6182
-VERIFY-
** Main Menu **
- - - - - - - - - - - - - -
Modified Consts
x4
Fig 3.8 Modified Constants Menu Access Procedure
-A.TUNE-
** Main Menu **
- - - - - - - - - - - - - -
Auto-Tuning
x5
Fig 3.9 Auto-Tuning Menu Access Procedure
Digital Operator 3 - 13
Aotewell
and keys to scroll through the "Modified Constants" list.
Aotewell
Email: Sales@aotewell.com
See Note 1
See Note 1
-A.TUNE-
-A.TUNE-
Tuning Mode Sel
Mtr Rated Power
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
T1-01= 2
*2*
T1-02= 0.40kW
Term Resistance
(0.00~650.00)
"2"
"0.40kW"
http://www.aotewell.com