Terminal Numbers And Wire Sizes (Same For All Drives) - YASKAWA F7 User Manual

http://www.aotewell.com
Type No.
FM
Analog
Output
Signals
AM
AC
RP
Pulse I/O
MP
R+
R-
RS-485/
S+
422
S-
IG
Terminals
S1, S2, S3, S4, S5, S6, S7, S8, SN,
SC, SP, +V, -V, A1, A2, A3, AC, RP,
M1, M2, M3, M4, M5, M6, MA, MB,
MC, FM, AC, AM, MP, R+, R-, S+,
S-, IG
E(G)
*1 Use shielded twisted-pair cables to wire an external speed command.
*2 Yaskawa recommends using straight solderless terminals on digital inputs to simplify wiring and improve reliability.
*3 Yaskawa recommends using a thin-slot screwdriver with a 3.5mm blade width.
Tel: +(86) 755 8660 6182
Table 2.11 Control Circuit Terminals (Continued)
Default Function
Output frequency
Output current
Analog common
Pulse input
Pulse monitor
Modbus
communication input
Modbus
communication output
Signal common
Table 2.12 Terminal Numbers and Wire Sizes (Same for all Drives)
Tightening
Terminal
Screws
Phoenix
4.2 to 5.3
*3
(0.5 to 0.6)
type
7.0 to 8.8
M3.5
(0.8 to 1.0)
Electrical Installation 2 - 21
Aotewell
Description
0 to +10Vdc / 100% frequency
-10 to +10Vdc / 100% frequency
4 to 20mA / 100% frequency
0 to +10Vdc / 100% Drive's rated
output current
-10 to +10Vdc / 100% Drive's
rated output current
4 to 20mA / 100% Drive's rated
output current
Pulse input frequency reference
Pulse output frequency
For 2-wire RS-485, jumper R+ and S+ and
jumper R- and S-.
Possible
Torque
Wire Sizes
lb-in
2
AWG (mm )
(N•m)
Stranded
wire:
26 to 16
(0.14 to 1.5)
20 to 14
(0.5 to 2)
Aotewell
Email: Sales@aotewell.com
Multi-function
analog output 1.
Function set by
H4-01.
Multi-function
analog output 2.
Function set by
H4-04.
–
Function set by
H6-01.
Function set by
H6-06.
–
Recommended
Wire Size AWG
2
(mm )
18
• Shielded, twisted-pair wire
(0.75)
• Shielded, polyethylene-covered,
vinyl sheath cable
12
(1.25)
http://www.aotewell.com
Signal Level
0 to +10Vdc
-10 to +10Vdc
(Max current 2mA)
4 to 20mA, 500Ω
-
0 to 32kHz (3kΩ) ±5%
High level voltages
3.5 to 13.2
Low level voltages
0.0 to 0.8
Duty Cycle (on/off)
30% to 70%
0 to 32kHz
+5V output
(Load: 1.5kΩ)
Differential input,
PHC isolation
Differential output,
PHC isolation
–
Wire Type
*1
*2