Mounting The Digital Operator - YASKAWA F7 User Manual

http://www.aotewell.com

Mounting the Digital Operator

After attaching the front cover, mount the Digital Operator onto the Drive using the following procedure:
1. Hook the Digital Operator at A (two locations) on the left side of the opening on the front cover by moving in the direction
of arrow 1 as shown in the following illustration.
2. Press the Digital Operator in the direction of arrow 2 until it snaps in place at B (two locations).
1. Do not remove or attach the Digital Operator and do not mount or remove the front cover using methods
IMPORTANT 2. Never attach the front cover to the Drive with the Digital Operator already attached. Damage to the Digital
Tel: +(86) 755 8660 6182
Fig 1.13 Mounting the Digital Operator
other than those described above, or damage to the Digital Operator or Drive may occur.
Operator may occur. Always attach the front cover to the Drive first, and then attach the Digital Operator
to the front cover.
Physical Installation 1 - 15
Aotewell
1
2
Aotewell
Email: Sales@aotewell.com
A
B
http://www.aotewell.com